Is your fax set up correctly?
Use the following checklist to help you define what is causing any faxing problems you
might be encountering.
●
Are you using the fax cord that was supplied with the device? This device has been
tested with the supplied fax cord and was proven to meet device specifications. If you
are not using the supplied fax cord, reinstall it.
●
Is the fax cord installed in the correct port on the device? It should be plugged into the
"line" port (the port that is marked with a
(HP LaserJet 3015 all-in-one or HP
LaserJet 3030 all-in-one) or with an "L" (HP LaserJet 3380 all-in-one)). See
Connecting
the device to a telephone line
for details.
●
Is the fax cord seated in the port on the device? Disconnect and reconnect the fax
cord to make sure that it is well seated in the correct port.
●
Is the telephone jack working properly? Verify that a dial tone exists by attaching a
telephone to the jack on the wall. Can you hear a dial tone and can you make a
telephone call?