HP LaserJet 3030 All in One Printer - Scanning to the Readiris OCR software

background image

Scanning to the Readiris OCR software

1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF)

input tray. Adjust the media guides to hold the originals in place.

OR

Lift the flatbed scanner lid and load the original that is to be scanned face-down on the
flatbed scanner with the top, left corner of the document at the lower-right corner of the
glass. Gently close the lid.

2. On the computer, click Start, select Hewlett-Packard, select hp LaserJet 3030 or

hp LaserJet 3020, and then select Scan.

OR

Press

START

SCAN

on the device. HP LaserJet Scan software opens on the computer.

Pressing

START

SCAN

to start the HP LaserJet Scan software is not supported when the

device is connected to a network. (Direct-connect only.)

3. In the HP LaserJet Scan dialog box, select Send it to the Readiris OCR software.

4. Click Scan.

Note

Readiris must be installed on the computer before the device can scan to the Readiris OCR
program. The software CD-ROM that came with the device includes the Readiris OCR
program.

70

Chapter 5 Scanning

ENWW