Labels
Note
For best results, use only HP-brand labels. To order HP supplies, visit
http://www.hp.com
.
28
Chapter 3 Printing
ENWW
When selecting labels, consider the quality of the following factors:
●
Adhesives: The adhesive material should be stable at 200° C (392° F), the device
maximum temperature.
●
Arrangement: Use only labels that have no exposed backing between them. Labels can
peel off sheets that have spaces between the labels, causing serious jams.
●
Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any
direction.
●
Condition: Do not use labels that have wrinkles, bubbles, or other indications of
separation. Never use a sheet of labels that has already been run through the device.