Replacing the automatic document feeder (ADF) pickup roller assembly
85
5. Lower the green lever with the flat green part fitting in between the rollers. Press down on
the green lever until you hear a snap.
6. To check for proper installation, lift the green lever until it remains open. The new pickup
roller assembly should be secured to the lever assembly and should not fall out.
7. Make sure that both sides of the assembly are secured by the green hooks.
86
Chapter 7 Cleaning and maintenance
ENWW
8. Lower the green lever assembly and close the automatic document feeder (ADF) lid.
Reinstall the input tray.
Note
If you are experiencing jams in the ADF, contact your local HP authorized service provider.
See
Service and support
.
9. Plug the device in, and then turn the power switch to the on position.
ENWW
Replacing the automatic document feeder (ADF) pickup roller assembly
87
88
Chapter 7 Cleaning and maintenance
ENWW
8