HP LaserJet 3030 All in One Printer - To clean the lid backing

background image

To clean the lid backing

Minor debris can accumulate on the white document lid backing that is located underneath the
device lid.

1. Turn off the device, unplug the power cord from the electrical socket, and raise the lid.


Turn the power switch to the off position.

2. Clean the white document lid backing by using a soft cloth or sponge that has been

moistened with a mild soap and warm water.

3. Wash the backing gently to loosen debris; do not scrub the backing.

4. Dry the backing by using a chamois or soft cloth.


Do not use paper-based wipes because they might scratch the backing.

5. If this does not clean the backing well enough, repeat the previous steps and use

isopropyl alcohol to dampen the cloth or sponge, and then wipe the backing thoroughly
with a damp cloth to remove any residual alcohol.


Cleaning the outside of the device


In certain areas of California, air pollution control regulations restrict the use of

liquid Isopropyl Alcohol (IPA) as a cleaning agent. In those areas of California,

please disregard the previous recommendations and use a dry, lint-free cloth.

The cloth may be moistened with water if desired.